INTERDISCIPLINARY ENGINEER/SCIENTIST
Duties You will perform professional scientific work involved with the scientific aspects in the development and application of mathematical theories, methods and operations in research and engineering, test and evaluation and logistics functions.
You will identify and solve a wide variety of complex problems with many competing objectives, variables and constraints.
You will deliver optimized technical solutions that are balanced to achieve required technical performance within cost, schedule and technology constraints.
You will function as a member of an integrated team/group providing technical guidance to a technical workforce and meeting customer requirements for products and/or services.
RequirementsConditions of Employment Must be a US Citizen.
Must be determined suitable for federal employment.
Must participate in the direct deposit pay program.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check.
To learn more about E-Verify, including your rights and responsibilities, visit e-verify.
gov Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
Males born after 12-31-59 must be registered for Selective Service.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty.
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA).
Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
Successful completion of a pre-employment drug test (including marijuana) is required.
A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test.
You will be subject to random testing.
QualificationsFor DP-03 Level:
Your resume must also demonstrate at least one year of specialized experience at or equivalent to the (GS 5-9) grade level or (DP-02) pay band in the Federal service or equivalent experience in the private or public sector.
Specialized experience must demonstrate the following:
1) Performing computer science, operations research or other professional scientific work involved with the scientific aspects in the development and application of mathematical theories, methods and operations in research and engineering, test and evaluation and logistics functions; 2) Identifying and solving a wide variety of complex problems with many competing objectives, variables and constraints; 3) Delivering optimized technical solutions that are balanced to achieve required technical performance within cost, schedule and technology constraints; 4) Providing technical guidance to a technical workforce and meeting customer requirements for products and/or services; 5) Managing a small to medium scale/scope or segments of a project/program.
For DP-02 Level:
In lieu of specialized experience, you may qualify with the following education:
2 years of progressively higher level graduate education leading to a master's degree OR master's or equivalent graduate degree OR You have a combination of experience and graduate education as described above that equates to one year of experience.
The percentage of the required education plus the percentage of the required experience equal one hundred percent.
Additional qualification information can be found from the following Office of Personnel Management website:
08XX:
all-professional-engineering-positions-0800.
pdf (opm.
gov) 1310:
Physics Series 1310 (opm.
gov) 1550:
Computer Science Series 1550 (opm.
gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social).
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
EducationApplicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
For 08XX series:
Successful completion of a professional engineering degree.
To be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.
nspe.
org OREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U.
S.
Office of Personnel Management.
For more information, please visit:
http:
//www.
nspe.
org/Licensure/HowtoGetLicensed/index.
html.
OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above).
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance.
Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positions.
For 1310:
Degree in physics; or related degree that included at least 24 semester hours in physics OR Combination of education and experience - courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education.
In either of the above, the courses must have included a fundamental course in general physics and, in addition, courses in any two of the following:
electricity and magnetism, heat, light, mechanics, modern physics, and sound.
For 1550:
Bachelor's degree in computer science OR bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science.
At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus.
All academic degrees and course work must be from accredited or pre-accredited institutions.
Foreign Education:
Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States.
It is the responsibility of the applicant to provide such evidence when applying for further information, visit:
http:
//www.
ed.
gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.
html Education must be accredited by an accrediting institution recognized by the U.
S.
Department of Education in order for it to be credited towards qualifications (https:
//www.
ed.
gov/).
Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.
S.
Department of Education.
If you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume.
See OPM's General Policies for information on crediting education.
Additional informationThis position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.
A relocation incentive may be authorized.
Vacancies filled from this announcement may be filled at any grade level listed.
If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management.
Promotion is neither implied nor guaranteed.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants.
Policy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf.
Veteran's preference does not apply when selecting individuals under this specific hiring authority.
However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
You will identify and solve a wide variety of complex problems with many competing objectives, variables and constraints.
You will deliver optimized technical solutions that are balanced to achieve required technical performance within cost, schedule and technology constraints.
You will function as a member of an integrated team/group providing technical guidance to a technical workforce and meeting customer requirements for products and/or services.
RequirementsConditions of Employment Must be a US Citizen.
Must be determined suitable for federal employment.
Must participate in the direct deposit pay program.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check.
To learn more about E-Verify, including your rights and responsibilities, visit e-verify.
gov Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
Males born after 12-31-59 must be registered for Selective Service.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty.
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA).
Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
Successful completion of a pre-employment drug test (including marijuana) is required.
A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test.
You will be subject to random testing.
QualificationsFor DP-03 Level:
Your resume must also demonstrate at least one year of specialized experience at or equivalent to the (GS 5-9) grade level or (DP-02) pay band in the Federal service or equivalent experience in the private or public sector.
Specialized experience must demonstrate the following:
1) Performing computer science, operations research or other professional scientific work involved with the scientific aspects in the development and application of mathematical theories, methods and operations in research and engineering, test and evaluation and logistics functions; 2) Identifying and solving a wide variety of complex problems with many competing objectives, variables and constraints; 3) Delivering optimized technical solutions that are balanced to achieve required technical performance within cost, schedule and technology constraints; 4) Providing technical guidance to a technical workforce and meeting customer requirements for products and/or services; 5) Managing a small to medium scale/scope or segments of a project/program.
For DP-02 Level:
In lieu of specialized experience, you may qualify with the following education:
2 years of progressively higher level graduate education leading to a master's degree OR master's or equivalent graduate degree OR You have a combination of experience and graduate education as described above that equates to one year of experience.
The percentage of the required education plus the percentage of the required experience equal one hundred percent.
Additional qualification information can be found from the following Office of Personnel Management website:
08XX:
all-professional-engineering-positions-0800.
pdf (opm.
gov) 1310:
Physics Series 1310 (opm.
gov) 1550:
Computer Science Series 1550 (opm.
gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social).
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
EducationApplicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
For 08XX series:
Successful completion of a professional engineering degree.
To be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET) ; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.
nspe.
org OREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U.
S.
Office of Personnel Management.
For more information, please visit:
http:
//www.
nspe.
org/Licensure/HowtoGetLicensed/index.
html.
OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above).
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance.
Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positions.
For 1310:
Degree in physics; or related degree that included at least 24 semester hours in physics OR Combination of education and experience - courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education.
In either of the above, the courses must have included a fundamental course in general physics and, in addition, courses in any two of the following:
electricity and magnetism, heat, light, mechanics, modern physics, and sound.
For 1550:
Bachelor's degree in computer science OR bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science.
At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus.
All academic degrees and course work must be from accredited or pre-accredited institutions.
Foreign Education:
Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States.
It is the responsibility of the applicant to provide such evidence when applying for further information, visit:
http:
//www.
ed.
gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.
html Education must be accredited by an accrediting institution recognized by the U.
S.
Department of Education in order for it to be credited towards qualifications (https:
//www.
ed.
gov/).
Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.
S.
Department of Education.
If you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume.
See OPM's General Policies for information on crediting education.
Additional informationThis position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.
A relocation incentive may be authorized.
Vacancies filled from this announcement may be filled at any grade level listed.
If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management.
Promotion is neither implied nor guaranteed.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants.
Policy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf.
Veteran's preference does not apply when selecting individuals under this specific hiring authority.
However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
